Steering column adapter package with upper and lower mount, custom steering shaft with 2 u-joints
Front and Rear bumpers – 1⁄4” plate (No bumper in the automotive industry is this tough)
Heavy-duty hood hinges
Lockable access door for front of pickup box
Body mount brackets (Specify donor vehicle)
Front fender-well braces
Custom Radiator: Heavy duty cross flow aluminum radiator, automatic transmission cooler built into side tank, electric puller tape fan, mounting brackets with hardware
Rubber extrusion for mounting windshields
Fiberglass

Hood with wheel well reinforcement
2 rear quarter panels
Custom Dash

Miscellaneous

1. Air Distribution Package
- Supply Plenum adapters
- Duct work to dash vents and defroster
- 2 defroster vents
- 2 dash defroster plenums
- Left and right dash vents
- Double center dash vent
- Bezel for donor truck heater control

2. Push/Pull Bumper Package
- 4 heavy duty pull rings
- 2 heavy duty rubber push bumpers

3. Trim Package
- Rear view mirror
- Left and right side rear view mirrors
- Interior coach insulation
- Complete carpet package
- Floor mats
- Hood and fender well package
a.) Foam insulation
b.) Left and right wheel well close offs (hood)
c.) Left and right wheel well close offs (body)
d.) Hinged steel safety bracket (stops hood from moving in the open position)

4. Wiper Package
- Lucas Motor Kit
- 2 wiper arms with blades
- Dash switch

 
 Miscellaneous (continued)

5. Slider Window Doors Package
a.) 4 slider type windows
b.) 4 steel inner door panels
c.) 4 fiberglass outer door panels
d.) Fastening hardware
e.) 8 door hinges
f. ) 4 door latches w/strikers
g.) 4 outer latch handles
h.) Heavy duty rubber perimeter extrusion
i. ) 4 inner latch handles

6. Template for windshield glass

7. Left and right rubber hood latches with locator pins

8. Custom rust-proof 35 gallon gas tank with mounting hardware

9. Hinge with rubber isolator for box to cockpit access door

10. Lockable latch for access door

11. Fastener package

12. Assembly manual
 
BADLANDS OPTIONS AND ACCESSORIES | Back to Top
Hardtop (Pick-up Type) Package.........….$1,590
a.) Mounting hardware
b.) Insulated headliner
c.) Rubber extrusion for mounting rear window
(glass supplied by customer)
d.) Steel tie-down panel
e.) Template for rear glass
f. ) Top to coach seals

Hardtop Top (Wagon Type) Upgrade......….$1,840
a.)Mounting hardware
b.) Insulated headliner
c.) Steel tie-down panel
d.) 2 switched rear seat courtesy lights
e.) 1 switched dome courtesy light
f. )2 front door courtesy light switches
g.) 1 switched cargo light
h.) 3 hardtop marker lights
i. )Complete wiring harness

Electrical Package …..............................$732
a.) 2 front side marker lights
b.) 2 front turn signals
c.) 12 front headlight adjusting studs
d.) 2 rear side marker lights
e.) 2 taillights
f. ) 1 rear license plate light
g.) 3 dash switches
h.) 2 switched rear seat courtesy lights
i. )1 switched dome courtesy light
j. ) 2 front door courtesy light switches
k.) 1 switched cargo light
l. ) 3 hardtop marker lights
m.) Complete wiring harness
n.) Specify side windows or not
o.) Rear glass window and hardware

Instrument Package….............................$609
Full set of high quality gauges and sending units
a.) Speedometer with odometer
b.) Tachometer
c.) Amp Indicator light
d.) Water temp
e.) Oil Pressure gauge
f. ) Fuel gauge
g.) Turn signal indicator lights
h.) Dash wiring harness (connects to main harness)
i. ) High Beam Light

Light Bar…............................................$486
a.) Custom tubular light bar
b.) 5 light assemblies
c.) Fastener package
d.) Dash switch
 Custom A/C Package.............................$363
a.) Custom A/C condenser
b.) Hardware and isolators

Rear Bench/Bed Seat…..........................$363
a.) 6’6” suspension seat bottom foam (3”) with seat plan
b.) 6’6” seat back foam (3”) with seat plan
c.) Left and right under seat support/storage drawer plans
d.) Mounting brackets, hinges, latches and hardware
e.) Suspension bands for seat bottom (upholstery not included)

Grill Guard........................................….$523
a.) Heavy duty custom tubular wrap around guard
b.) Heavy duty bumper mounted hinge set
c.) 1 latch bracket

Spare Tire Rack................................….$400
a.) Swing away rack with 2 heavy duty bolt on hinges
b.) Tire mount (accepts standard tires 235 x 78 x 15 or full size)
c.) Release latch and striker
d.) Rubber bumper (2)

Hitch Package…..................................$276
a.) 2 heavy duty front and rear hitch receivers

Roll-Up Window Doors…......................$615
(Each, in lien of standard slider window doors)
a.) 4 steel inner door panels w/window channels
b.) 4 fiberglass outer door panels
c.) 4 fiberglass inner door panels
d.) Fastening hardware
e.) Window regulator (crank or electric)
f. ) 8 door hinges
g.) 4 door latches w/strikers
h.) 4 outer latch handles
i. ) Heavy duty rubber perimeter extrusion
j. ) 4 inner latch handles
k.) 4 tempered glass windows
 

MONEY BACK GUARANTEE
Within 10 days of receiving your kit, if you do not find superior quality components, you may request a refund of your purchase price exclusive of freight or damage.

Prices effective 1/1/2004 subject to change without notice. Classic Roadsters II reserve the right to substitute components of equal or greater value.

All parts and accessories ordered AFTER the kit has been shipped are subject to increased packaging, handling and ground shipping charges.

You should check with your state motor vehicle department before registering your complete kit assembly.

Back to Top

[Home] [About] [Contact Us] [Special Pricing] [FAQ] [C-427] [Sebring MX] [Badlands RT]